Our developed and manufactured products belong to a new generation of detectors. They are based on a new electrostatic principle that has never been used in security systems production before. Among the advantages of our detectors there is an excellent operational performance, anti-sabotage characteristics, reliability and a large field of application.

                  Services

          development

          effectiveness examination

Metal detector FRACTAL-01/21 offers reliable protection against any attempted acts of terrorism and

criminal actions.

Metal detectors used in the access control system ensure 100% detection of cold steel and firearms,

explosive device cases and other objects containing ferromagnetic materials.

1. Passive principle of operation i.e. metal detector components emit no active radiation across the

frequency range in the monitored spatial region

2. High selectivity

3. High noise immunity

4. Low power consumption

5. Lenient installation requirements

6. High throughput

7. Concealed version is possible

8. Custom-made design.

Metal detector FRACTAL-01/21 detects external magnetic field parameters change under object

of search movement in the guarded zone. Magnetic field parameters vary with articles containing

ferromagnetic material (combat firearms, steel knives, dictaphones, etc.) carried through the

guarded zone i.e. monitored aperture. As a result the sensor generates an analog signal to be

detected by a signal-processing unit located in the control console.

Description	Qnty	Remarks
Sensor	1 set	Four antennas
Signal cable	5 m	Cable can be extended up to 30 m
Control console	1 set	Desktop version with wall fastening possible

Fast Deployment

Description	Value	Remarks
Principle of operation	Passive	Detection of external magnetic field parameters change under object of search movement in the guarded zone (monitored aperture)
Throughput	800 men/hour, minimum
Passageway width	up to 1 m
Control console overall dimensions	230x230x100 ??	With built-in storage battery
Readiness time	10 sec, max.	Technical readiness time on switching-on - 60 sec, max.
Speed with which object is carried	from 0.5 to 1.5 m/sec.	Detection of weapons throw
Dimensions of object being carried	150x15x3 mm, min.
Minimum weight of object to be detected	1 g, min.
Object of search detection probability	99%, min/td>
Information density	"Operation"	Sensor signal is absent. Green indicator OPERATION on the control console display illuminates
	"Alarm"	Sensor signal is available. Red indicator ALARM and one or two pilot LEDs of left or right post sensor response illuminate. Short-duration beep can go with the ALARM light signal
Operating temperature range at relative air humidity of up to 98% without moisture condensation	minus 10 o? to +50 o?	Control console
	minus 40 o? to +50 o?	Sensor
Indication	Light and audible	Alarm signal duration: light - 1 sec, minimum audible - 0,50±0,25 sec, minimum
Accuracy of detected object site indication	Control console indication	Possible is indication of left or right side
Number of zones to be detected	Two
Number of selective detection programs	Two
Supply voltage	220 ?	Possible is power supply from built-in storage battery or external 12-V 200-mA DC power source
Power consumption	2,6 W	When mains-operated
Current consumption in standby mode	60 m?, max
Time of operation from emergency power	4 hours, minimum	12-V 200-mA DC storage battery
Time between failures	26,000 h
Weight	5 kg

Objects detected	Articles of "arms" steel and other materials of high magnetic conductivity i.e. fighting knives, small arms, grenades, tools, etc. Articles containing permanent magnets i.e. dictaphones, portable radio stations, pagers and mobiles of some types
Objects practically not detected	Articles of low-magnetic-conductivity steel and small-size ones i.e. keys, watches with steel bracelet, etc.
Objects not detected	Articles of non-ferrous metals i.e. coins, chains, zippers, aluminum foil, brass, titanic, and aluminum keys. Non-metal articles

Proprietary anti-jamming technology ensures false-response-free operation under complicated electromagnetic and man-made noise, the following requirements being observed.

Permissible noise source	Distance from sensor to noise source
Highway	5 to 10 m
Tramway	7 to 14 m
Metal doors, doors with solid metal inserts included	5 to 8 m
Powerful man-made noise sources i.e. power transformers, high-voltage power lines	4 to 9 m
Stationary household appliances i.e. computers, heaters, etc.	0.5 to 2 m
Lifts and hoists	3 to 5 m
Office equipment	1 to 3 m

Tabulated data has been received as a result of metal detectors operation at different objects.

Certificate of Conformance No.???? RU. ?00574 issued by the Engineered Security Equipment Certification Agency of the ATOMINFORMZASHCHITA Research and Certification Center.

     Metal-detectors of "FRACTAL-01" series, Description Download (PDF, 686 Kb)

     Metal-detectors of "FRACTAL-01" series, Videoroller Download (AVI, 25,3 Mb)